Sign Up For Our Newsletter
Don't miss out on new products or promotions, sign up for the FOT | JET Store Newsletter today!
Newsletter
If youre looking for a jobsite saw thats both powerful and portable, look no further than the all-new JET B3NCH 10" Jobsite Table Saw with stand. This table saw features a 15 Amp soft start motor, 25" right rip capacity, a riving knife and anti-kickback pawls for added safety, and a heavy-duty folding stand with wheels for quick setup and portability. Weighing in at just under 100lbs, this powerhouse brings the stability of a stationary table saw to your jobsite, then rolls away when youre done.
JBTS-10MJS 10" JOBSITE TBLSAW W/STNDTEXT
Table Opening Diameter (In.) | 6/19/1964 |
---|---|
Maximum Diameter Cutter Below Table (In.) | 6 |
Spindle Travel (In.) | 4 |
Electrical Controls | Yes |
Maximum Diameter Cutter Above Table (In.) | 7/1/2002 |
Fence Travel (Major and Minor) (In.) | 4, 1 |
Spindle Size Under Nut (In.) | 4 |
Table Insert Opening Diameter (In.) | 2-9/16, 4-5/16 |
Table Inserts (In.) | 2 |
Table T-Slot (In.) | 3/4 x 3/8 |
Stock Number | 708326 |
SAP Material Group | WW150 |
Brand | Jet |
SAP Material Type | ZFIN |
SAP Warranty | 5 Year |
Model Number | JWS-35X5-1 |
SAP DChain Status | 0 |
SAP Division | 0 |
SAP Country of Origin | TW |
SAP Rounding Profile | NA |
SAP Height | 41 |
SAP Length | 30 |
SAP Gross Weight | 550 |
SAP Net Weight | 473 |
SAP Volume | 28.472 |
SAP Width | 40 |
Prewired Voltage (V.) | 115 |
Dust Port Outside Diameter (In.) | 4 |
Table Height from Floor (In.) | 33-1/4 |
Motor Power (HP) | 5 |
Motor Phase | 1 |
Dust Collection Minimum CFM Required (CFM) | 600 |
Maximum Spindle Diameter (In.) | 1/1/2004 |